Sale!

Deta eVolo EVC7001

Original price was: £545.00.Current price is: £436.00.

Description
The eVolo electric vehicle charge points provide AC
Mode 3 charging to vehicles and operates via a
smart phone APP. For use at domestic properties.

Charge point control, scheduling and energy usage
monitoring via APP

Commissioned using a mobile device which is Bluetooth
enabled and a mobile data connection, e.g. 4G.

LED indicators

PEN fault detection and isolation

Connected product (as required by the Smart Charge
Point Regs.) via ethernet or WiFi connectivity

RS485 connectivity for load management

Charge APP needs to be downloaded to register the
product so that end user can restrict use and authorize
access

Easy to install: the mounting base plate has mains wiring
terminals and has rear, top and bottom drill out cable
entry points; the charge point attaches to the base

Suitable for wall or post mounting

7.4kW charging power (max. 32A)

Firmware updates OTA, once the product is registered

RFID ready feature can be enabled via eVolo website

2Years extendable (the charge point needs to be
registered to extend the warranty)

Require the expertise of our specialised team to handle your charger installation? Opt for our hassle-free installation service. By selecting installation, a dedicated member of our Electric Vehicle (EV) team will promptly reach out to you to coordinate a site survey and set an installation date. For further details, kindly refer to the Terms and Conditions at the bottom of the page.

Surge Protection Devices divert the excess power from a power surge into the earth instead of it reaching your electrical appliances, offering an additional layer of protection and safety. The 18th Edition Amendment 2 of the Wiring Regulations mandates Surge Protection Devices (SPDs) for new electrical circuits however you can choose to opt out of SPDs during your EV charger installation.

Category:

Description

Range
7.4kW Mode 3 EV Charger (eDock)
EVC7001


Description

The eVolo electric vehicle charge points provide AC
Mode 3 charging to vehicles and operates via a
smart phone APP. For use at domestic properties.


Compliance

IEC 618511:2019 EVSE mode 3

IEC 62955

EMC Regulations 2016

ROHS Regulations 2012

RED 2014/53/EU

UK Electric Vehicles (Smart Charge Points)
Regulations 2021

Installation to be in accordance with BS7671


Technical Specification

Charging

Type 2 connector

Cable lock via APP

Multicolour LED indicators

Scheduled charging
via APP

Electrical

Voltage
220V 240V AC 50Hz single
phase

Earthing Arrangements
TNCS or TT
Load Management
Maximum charging current
can be set via the APP

Cable Size
10mm2 max.
Builtin RCD
30mA (AC), 6mA (DC)
Builtin PEN fault detection

Builtin metering
±2%
Surge protection:


level III lightning
protection, 4000 V
(recommended to fit Type 2
SPD in the consumer unit)

Isolation
Class II

Physical

Size (w x h x d)
202 x 202 x 115mm approx.
Weight
2.5kg approx.
Cover colour
Anthracite Grey
Ingress protection
IP54
Impact protection
IK10
Flammability rating
IEC 60695110 UL94 5VB
or V0

UV resistant

Ambient Operating
temperature

30°C to +50°C
Communications
WiFi 2.4GHz network

Ethernet RJ45

Bluetooth for commissioning via APP
Remote management via cloud

OCPP 1.6J

Reviews

There are no reviews yet.

Be the first to review “Deta eVolo EVC7001”

Your email address will not be published. Required fields are marked *